RESEARCHER PROFILE

Boyan Dochev

← Back to Technical University of Sofia

B

Technical University of Sofia

Aluminum Alloy Microstructure PropertiesAluminum Alloys Composites PropertiesMetallurgical and Alloy ProcessesSurface Treatment and CoatingsMetal and Thin Film Mechanics

Boyan Dochev works in Aluminum Alloy Microstructure Properties, Aluminum Alloys Composites Properties, Metallurgical and Alloy Processes, Surface Treatment and Coatings, Metal and Thin Film Mechanics. Recorded institutional associations include Technical University of Sofia, Technical University of Gabrovo.

57Publications
100Citations
5H-index

Inclusion identifies researchers whose recorded research contributions may inform their university’s understanding of its research community. It does not rank individual research quality or establish current employment.

Selected research works

Up to 100 highly cited works; DOI links open the original research. Counts reflect the collected record, not real-time citation totals.

  1. Investigation of the potential of simultaneous modification of hypereutectic aluminum-silicon AlSi18 alloy with conventional and nano-modifier

    2019 · 11 citations
  2. Changes in the Surface Texture of Thermoplastic (Monomer-Free) Dental Materials Due to Some Minor Alterations in the Laboratory Protocol—Preliminary Study

    2022 · 10 citations
  3. In Vitro Study of the Surface Roughness, Hardness, and Absorption of an Injection-Molded Denture Base Polymer, Manufactured under Insufficient Mold Solidification

    2024 · 7 citations
  4. Effect of P modifiers, SiC nanomodifiers and combinations them on the structure of a hypereutectic aluminum-silicon AlSi18 alloy

    2020 · 5 citations
  5. Influence of a P modifier, a nanosized SiC modifier, and a combination of them on the mechanical properties of a hypereutectic aluminium-silicon alloy AlSi18

    2020 · 5 citations
  6. COMPARATIVE STUDY OF THE INFLUENCE OF SOME NANOMODIFIERS ON THE MICROSTRUCTURE AND CORROSION PROPERTIES OF ALSI18 ALLOY

    2021 · 5 citations
  7. Effects Of Nanomodifiers on The Wear Resistance of Aluminum-Silicon Alloy AlSI18 In Tribosystems In Case of Reversive Friction And Lubrication

    2020 · 5 citations
  8. Investigation of the Influence of Alloying Elements Ni, Cr, Co and Mo on the Crystallization Process, Phase Composition and Corrosion Resistance of AlSi25Cu4Cr and AlSi25Cu5Cr Alloys

    2025 · 5 citations
  9. Deposition and Properties of Nanostructured Multilayer Cr/(Cr/a-C)ml Coating on Stainless Steels

    2025 · 5 citations
  10. Abrasive Wear of A Hypereutectic Alloy AlSi18, Modified By Different Modifiers

    2020 · 4 citations
  11. Investigation of the structure and mechanical properties of alloys AlSi25Cu4Cr and AlSi25Cu5Cr alloyed with refractory metals

    2024 · 4 citations
  12. Deposition of Multilayer Nanostructured Coating Cr/(Cr/a-C)ml on Alloy Steels

    2025 · 4 citations
  13. Study of the influence of both a modifier P and a nanomodifier ND on the structure of a hypereutectic aluminium-silicon alloy AlSi18

    2019 · 3 citations
  14. Investigation of the corrosion resistance of complex alloyed hypereutectic aluminium-silicon alloys

    2024 · 3 citations
  15. Approaches to Creating Colorful 3D-Printed Parts and Reliefs

    2025 · 3 citations
  16. Investigation of the Mechanical Properties of Thermosetting Polymers Reinforced with Carbon Particles

    2025 · 3 citations
  17. INVESTIGATION OF THE INFLUENCE OF THE MODIFIERS P, SR, TI AND COMBINATIONS OF THEM ON THE STRUCTURE AND MECHANICAL PROPERTIES OF ALSI25 ALLOY

    2021 · 2 citations
  18. Study of the retention of the modifying effect of a nanodiamond nanomodifier on the structure of AlSi18 alloy

    2024 · 2 citations
  19. INVESTIGATION OF THE INFLUENCE OF THE MANUFACTURING PROCESS ON THE STRUCTURE OF HYPEREUTECTIC ALUMINIUM-SILICON ALLOYS

    2024 · 2 citations
  20. Microstructure and mechanical properties of a hypereutectic alloy AlSi18, modified by a nanodiamond and phosphorus

    2019 · 1 citations
  21. INVESTIGATION OF THE INFLUENCE OF DIFFERENT MODIFIERS ON THE EUTECTIC SI IN THE COMPOSITION OF ALSI18 ALLOY

    2021 · 1 citations
  22. Comparative study of corrosion of aluminum alloy AlSi25 used in the automotive industry

    2022 · 1 citations
  23. High-temperature tests of piston hypereutectic aluminum-silicon alloy AlSi18Cu3CrMn

    2022 · 1 citations
  24. INVESTIGATION OF THE STRUCTURE OF ALSI25CU4CR AND ALSI25CU5CR ALLOYS

    2023 · 1 citations
  25. OPTIMIZATION OF A TECHNOLOGICAL PROCESS FOR HEAT TREATMENT OF CU99.9 WITH DIFFERENT DEGREES OF PLASTIC DEFORMATION

    2024 · 1 citations
  26. DEVELOPMENT OF COMPOSITES BASED ON THERMOSETTING POLYMERS (EPOXY, POLYESTER AND VINYLESTER RESINS) WITH CENOSPHERE FILLERS IN DIFFERENT CONCENTRATIONS – 5 WT.%, 10 WT.% AND 15 WT.%

    2025 · 1 citations
  27. Exploring Polymeric Surfaces Manufactured Under Different Temperature Conditions—A Preliminary Experimental Study of Hardness

    2025 · 1 citations
  28. Investigation of the Structural, Mechanical and Operational Properties of an Alloy AlSi18Cu3CrMn

    2025 · 1 citations
  29. Investigation of the Mechanical Properties and Friction Coefficient of Cr/CrTiAl and Cr/(CrTiAl)N/CrTiAl PVD Coatings Deposited on 42CrMo4 QT Steel

    2026 · 1 citations
  30. Phase Composition of Al–Si Alloys for Internal Combustion Engine Pistons: Finite Element Structural Analysis

    2026 · 1 citations
  31. Comparative Study of Wear Behavior of Hypereutectic Al–Si Piston Alloys Using Experimental and Numerical Methods

    2026 · 1 citations
  32. Study of the Influence of Combinations of Modifiers on the Structure and Mechanical Properties of AlSi18Cu5Mg Alloy Used in Tribological System

    2021 · 0 citations
  33. Study of AlSi18Cu3CrMn Alloy, Suitable for Use in Friction Pairs in Automotive Industry

    2021 · 0 citations
  34. Study of the influence of both a modifier P and a nanomodifier ND on the structure of a hypereutectic aluminium-silicon alloy AlSi18

    2019 · 0 citations
  35. Investigation of the influence of heat treatment on the structure and properties of aluminum-silicon alloy AlSi18Cu3CrMn

    2022 · 0 citations
  36. Studyofthe Structureand Mechanical Properties of Alloy AlCu4Mg2 afterPlastic Deformation

    2023 · 0 citations
  37. INVESTIGATING THE POSSIBILITY OF ALLOYING AN ALLOY ALSI25CU5CR WITH CO, CR AND MO USING METAL POWDER

    2023 · 0 citations
  38. Investigation of the influence of the reduced temperature of eutectic crystallization on the composition of the eutectic of aluminum-silicon alloys

    2024 · 0 citations
  39. Investigation of the influence of the microstructure of AlSi25Cu4Cr and AlSi25Cu5Cr alloys on the roughness class in machining

    2024 · 0 citations
  40. INVESTIGATION OF THE INFLUENCE OF DIFFERENT MODIFIERS ON THE CORROSION RATE OF ALSI18CU3CRMN ALLOY

    2024 · 0 citations
  41. INVESTIGATION OF THE INFLUENCE OF ARTIFICIAL AGING PARAMETERS ON THE MICRO AND MACRO HARDNESS OF ALSI12CU5MGCR AND ALSI12CU5MN ALLOYS

    2024 · 0 citations
  42. Study of the Microstructure of Non-Standardized Alternative Piston Aluminum-Silicon Alloys After Various Modifications: Influence of Modifying Treatments on the Microstructure and Properties

    2025 · 0 citations
  43. Effect of heat treatment on phase composition and mechanical properties of AlSi18Cu5Mg alloy

    2025 · 0 citations
  44. Structure and mechanical properties of an alloy AlSi9Cu3 modified with Sr and subjected to heat treatment

    2025 · 0 citations
  45. Investigation of the possibilities of deposition of ceramic coatings on 3D printed polymer samples

    2025 · 0 citations
  46. Development of composites based on thermosetting polymers with cenospheres fillers

    2025 · 0 citations
  47. Corrosion Properties and Performance of Nanostructured Multilayered Chromium–Amorphous Carbon Coatings on HS6-5-2 Steel

    2026 · 0 citations
  48. "Modification with nano and multidisperse powders of aluminum-silicon alloys"

    2020 · 0 citations
  49. Comparative Study of Nanostructured Multilayer Cr/(Cr/a-C)ml Coatings Deposited on HS6-5-2 Steel by Magnetron Sputtering

    2026 · 0 citations
  50. Duplex Surface Modification of 40CrMnMo7 Tool Steel by Chemical-Thermal Treatment and PVD Coating

    2026 · 0 citations

← Return to the university profile